|
Taiyo Parker Hydraulic Cylinder |
The regarding performance and installation dimension is governed by and construed under JOHS of Japan Fluid Power Industries Association.
Models | Double-acting Single-rod/Standard |
Cylinder Bore | 40,50,63,80,100,125,140,160 |
Mounting Style | SD,LA,FA,FB,CA,CB,TA,TC |
Rod Type | B Rod |
Norminal Pressure | 21MPa |
Max. Working Pressure | Rod Side:26.5MPa Head Side:24.5MPa |
Proof Test Pressure | 31.5MPa |
Min. Operating Pressure | Rod Side: less than 0.45MPa Head Side: less than 0.3MPa |
Operating Speed Range | 8 to 300mm/s(Not including Cushion) |
Operating Temperature | -10 to +80 Celsius Degree (But do not use when frozen) |
Cushion Mechanism | Metal fitting system |
Working Fluid | Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.) |
Thread Tolerance | JIS 6g/6H |
Standard Stroke |
|
Stroke Tolerance | |
Accessories | Boots | Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex |
Rod End Attachment | Rod End Eye(T type)/Rod End Clevis(Y type) |
Others | Lock Nut |
Note1) | Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure. |
Note2) | Please order longer dimension A of rod end threaded part if you use with lock nut. |
Note3) | Conex of boots is the registered trade mark of Teijin,Ltd. |
|
| Allowable Fluid, Seal Material |
|
Seal Material | Allowable Fluid |
Petroleum-based
Fluid | Water-Glycol
Fluid | Phosphate-Ester
Fluid | Water in Oil
Fluid | Oil in Water
Fluid |
1:Nitrile rubber | | | | | |
2:Urethan rubber | | | | | |
3:Fluoric rubber | | | | | |
6:HNBR | | | | | |
Note1) | The marked items are applicable, while marked items are inapplicable. Please contact to us when you use marked items. |
Note2) | The marked items are the recommended packing materials in case of the first priority to abrasion resistance. |
Tidak ada komentar:
Posting Komentar